VIN是英文Vehicle Identification Number（汽车识别码）的缩写。VIN每一部车都有, 每个号码都不一样。ASE标准规定：VIN码由17位字符组成，它包含了车辆的制造商、车型年份、车型、车身型式及代码、发动机代码及组装地点等信息。通过汽车的VIN，可以得到汽车的历史报告，而这也逐渐成为旧车买卖中买方重视的资料。
G = 所有属于通用汽车的品牌：Buick, Cadillac, Chevrolet, Oldsmobile, Pontiac, Saturn
注意：VIN中不会包含 I、O、Q 三个英文字母。
Vehicle Identification Number
From Wikipedia, the free encyclopedia
"VIN" redirects here. For other uses, see Vin (disambiguation).
A Vehicle Identification Number, commonly abbreviated to VIN, is a unique serial number used by the automotive industry to identify individual motor vehicles. VINs were first used in 1954. From 1954 to 1981, there was no accepted standard for these numbers, so different manufacturers used different formats.
In 1981, the National Highway Traffic Safety Administration of the United States standardized the format. It required all over-the-road-vehicles sold to contain a 17-character VIN, which does not include the letters I (i), O (o), or Q (q) (to avoid confusion with numerals 1 and 0).
There are vehicle history services in several countries that can help potential car owners use VINs to find lemons and branded vehicles. See the used car article for a list of countries where this service is available.
 VIN: classification
There are at least four competing standards used to calculate VIN.
FMVSS 115, Part 565: Used in United States and Canada
ISO Standard 3779: Used in Europe and many other parts of the world
SAE J853: Very similar to the ISO standard
 Components of the VIN
Modern-day Vehicle Identification Number systems are based on two related standards, originally issued by the International Organization for Standardization (ISO) in 1979 and 1980; ISO 3779 and ISO 3780, respectively. Compatible but somewhat different implementations of these ISO standards have been adopted by the European Union and the United States of America.
The VIN is composed of the following sections:
 World Manufacturer Identifier
The first three characters uniquely identify the manufacturer of the vehicle using the World Manufacturer Identifier or WMI code. A manufacturer who builds fewer than 500 vehicles per year uses a 9 as the third digit, and the 12th, 13th and 14th position of the VIN for a second part of the identification. Some manufacturers use the third character as a code for a vehicle category (e.g., bus or truck), a division within a manufacturer, or both. For example, within 1G (assigned to General Motors in the United States), 1G1 represents Chevrolet passenger cars; 1G2, Pontiac passenger cars; and 1GC, Chevrolet trucks.
The first character of the WMI is the region in which the manufacturer is located. In practice, each is assigned to a country of manufacture, although in Europe the country where the continental HQ is located can assign the WMI to all vehicles produced in that region (Example: GM Europe cars whether produced in Germany, Spain, UK, Belgium or Poland carry the W0 WMI because GM Europe is based in Germany).
In the notation below, assume that letters precede numbers and that zero is the last number. For example, 8X-82 denotes 8X, 8Y, 8Z, 81, 82. In particular this does not include 80.
 Country codes
 Vehicle Descriptor Section
The 4th to 9th positions in the VIN are the Vehicle Descriptor Section or VDS. This is used, according to local regulations, to identify the vehicle type, and may include information on the automobile platform used, the model, and the body style. Each manufacturer has a unique system for using this field. Most manufacturers since the 1980s have used the 8th digit to identify the engine type whenever there is more than one engine choice for the vehicle. Example: for the 2007 Chevrolet Corvette U= 6.0L V8, E= 7.0L V8.
 North American Check Digits
One element that is fairly consistent is the use of position 9 as a check digit, compulsory for vehicles in North America, and used fairly consistently even outside this rule.
 Vehicle Identifier Section
The 10th to 17th positions are used as the Vehicle Identifier Section or VIS. This is used by the manufacturer to identify the individual vehicle in question. This may include information on options installed or engine and transmission choices, but often is a simple sequential number. In North America, the last five digits must be numeric.
 Model year encoding
One consistent element of the VIS is the 10th digit, which is required worldwide to encode the model year of the vehicle. Besides the three letters that are not allowed in the VIN itself (I, O and Q), the letters U and Z and the digit 0 are not used for the model year code. Note that the year code is the model year for the vehicle.
The year 1980 was encoded by some manufacturers, especially General Motors and Chrysler, as "A" (since the 17-digit VIN wasn't mandatory until 1981, and the "A" or zero was in the manufacturer's pre-1981 placement in the VIN), yet Ford and AMC still used a zero for 1980. Subsequent years increment through the allowed letters, so that "Y" represents the year 2000. 2001 to 2009 are encoded as the digits 1 to 9, and subsequent years are encoded as "A", "B", "C", etc.
On April 30, 2008, the US National Highway Traffic Safety Administration adopted a final rule amending 49 CFR Part 565, "so that the current 17 character vehicle identification number (VIN) system, which has been in place for almost 30 years, can continue in use for at least another 30 years", in the process making several changes to the VIN requirements applicable to all motor vehicles manufactured for sale in the United States. There are three notable changes to the VIN structure that affect VIN deciphering systems:
The make may only be identified after looking at positions 1–3 and another position, as determined by the manufacturer in the second section or 4–8 segment of the VIN.
In order to identify exact year in passenger cars and multipurpose passenger vehicles with a GVWR of 10,000 or less, one must read position 7 as well as position 10. For passenger cars, and for multipurpose passenger vehicles and trucks with a gross vehicle weight rating of 10,000 lb (4,500 kg) or less, if position 7 is numeric, the model year in position 10 of the VIN refers to a year in the range 1980–2009. If position 7 is alphabetic, the model year in position 10 of VIN refers to a year in the range 2010–2039.
The model year for vehicles with a GVWR greater than 10,000 lb (4,500 kg), as well as buses, motorcycles, trailers and low speed vehicles may no longer be identified within a 30-year range. VIN characters 1–8 and 10 that were assigned from 1980–2009 can be repeated beginning with the 2010 model year.
 Plant Code
Another consistently-used element (which is compulsory in North America) is the use of the 11th character to encode the factory of manufacture of the vehicle. Although each manufacturer has its own set of plant codes, the location in the VIN is standardized.
 Check digit calculation
If trying to validate a VIN with a check digit, first either: (a) remove the check digit for the purpose of calculation; or (b) utilize the multiplicative property of zero in the weight to cancel it out. You should later compare the original value of the check digit with the calculated value. If the two values do not match (and there was no error in the calculation), then there is a mistake in the VIN. However, a match does not prove the VIN is correct because there is still a 1 in 11 chance of any two distinct VINs having a matching check digit: an example of this would be the valid VINs 5GZCZ43D13S812715 (correct with leading five) and SGZCZ43D13S812715 (incorrect with leading character 'S').
 Transliterating the numbers
Transliteration consists of removing all of the letters, and substituting them with their appropriate numerical counterparts. These numerical alternatives (based on IBM's EBCDIC) can be found in the following chart. I, O and Q are not allowed, and can not exist in a valid VIN; for the purpose of this chart, they have been filled in with N/A (not applicable). Numerical digits use their own values.
S is 2, and not 1. There is no left-alignment linearity.
 Weights used in calculation
The following is the weight factor for each position in the VIN. The 9th position is that of the check digit. It has been substituted with a 0, which will cancel it out in the multiplication step.
 Worked example
Consider the hypothetical VIN 1M8GDM9A_KP042788, where the underscore will be the check digit.
The VINs value is calculated from the above table, this number will be used in the rest of the calculation.
Copy over the weights from the above table.
The products row is a result of the multiplication of the vertical columns: Value and Weight.
The products (8,28,48,35..24,16) are all added together to yield a sum of 351
Find the remainder after dividing by 11
351 MOD 11 = 10
351 ÷ 11 = 31 10/11
The remainder is the check digit. If the remainder is 10 then the check digit is X. In this example the remainder is 10, so the check digit is transliterated into X.
With a check digit of 'X' the VIN: 1M8GDM9A_KP042788 is written as: 1M8GDM9AXKP042788.
Straight-ones (seventeen consecutive '1's) will suffice the check-digit. This is because a value of one, multiplied against 89 (sum of weights), is still 89. And 89 divided by 11 is 8 with the remainder being the fraction "1 over 11," thus 1 is the check digit. This is an easy way to test a VIN-check algorithm.